Why Zepoxy steel 90-minute is Important ?
Because Zepoxy steel 90-minute is a two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped , tapped, filed , sanded and drilled after curing. At room temperature, Zepoxy steel 90 Mins in 4-6 hours to a dark grey color. A full cured is reached in 12-15 hours. Zepoxy steel 90 minutes has a tensile strength of 3960 PSI and sets to hard bond over-night. It can withstand temperatures up to 288 degree when fully cured.
Introduction of use :
Surface should be thoroughly clean, free from loose particles like dust, oil , grease etc. If the surface is shiny, rub it until a rough texture is formed over it. Take equal parts of A & B and mix it until thoroughly until a uniform paste is achieved. Mix thoroughly, best results can be achieved within 30 mins.
Zepoxy Steel 90 mins is available as follows :
1. Small tubes set of Part A 5 gm and Part B 5 gm. Supplied in a box of 10 set each.
2. Medium tubes set of Part A 15 gm and 15 gm. Supplied in a box of 10 sets each.
Shelf Life :
12 months from date of manufacture when stored under warehouse conditions in original un-opened packing. Extreme temperature / humidity may reduce shelf life.
How to Dry :
Sets in 4-6 hours, Cures in 12-15 hours. Allow 4-6 hours before handing and 12 hours (minimum) before putting object back in use.
Why Safety Measures :
This material can be used in 12 months during its production period. The material can be placed in normal conditions. Its life can be effected when you will place this material on hot surface, wet surface or in humidity. The motion of this material can be done easily. Don’t use its packing again.