Slice Anti-Rust Film (ARF)
ARF oil is anti-rust oil for machinery mold, especially used to prevent rust, absorb water, absorb, resist corrosion.
Special characteristics:
1. ARF oil is a rust-proof oil with a special lubricant nature.
2. ARF oil is a synthetic oil developed for maintenance in a mold making factory (mold).
3.Can prevent indoor rust from 1-10 years.
Silicone Release Agent
+ The release agent is always ready for use;
+ It does not contain any solvent;
+ No unpleasant odor occurs during spraying;
+ It can be operated in any position.
A fine mist is obtained which forms a uniform Silicone film on the mould. In view of the excellent release effect, one application is adequate for several moldings. The release agent is therefore very economical in use.
Application :
To obtain satisfactory results. It essential that the molds are clean. prior to the first use of silicone release agents, all residues from other release agents should be carefully removed. Apply a thin coat of release agent. The most efficient distance between nozzle and mold surface is about 30 to 50 cm (12 to 20″) if the moldings are to be subsequently printed, varnished, or labeled, please contact us, as for such cases special products are available.
How to use and attention:
1. Shake the can before use.
2. It must be placed away from children. Do not close to the fire.
3.The spray must be open, do not crush, do not expose to the sun, do not expose to temperatures higher than 49 degrees Celsius.
4. If sprayed properly, remove clean water. If not, go see a doctor immediately.
