Harris
is a fast curing one-part silicone sealant which cures with atmospheric moisture to form a high strength rubber seal with excellent adhesion to glass, glazed surface, metal, most plastic and coated surfaces , Harris is unaffected by high or low temperature: its superior physical properties are designed to give outstanding durability and performance.
Application:
Bonding Glass, metals ceramics. plastics epoxies, fiberglass, Gasket- Metal to metal flanges, sealing against moisture, dust, shock electrical insulation. Fixing of coil, condenser parts insulating seal for transistor and high voltage parts Formed in place of gasket to prevent leaks.
Direction for use:
Surface must be clean, Dry and sound, Mask joint edges with masking tape. Cut open cartridge; screw on nozzle and cut of tip at desired angle. Insert cartridge in gun and apply Harris silicone bubble-free continuously into the joint. fill the joint completely. Tool the surface it necessary within 8 minutes. On tack free remove the adhesive tape and smooth again
Caution:
Uncured material may irritate eyes, reparation system and skin, in case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Use only in well ventilated places. keep out of reach of children.
