Form-A-Gasket Sealant Permatex 2C 80011
Permatex Form-A-Gasket Sealant # 2 2C, Content: 311g, Made in USA
Placeholder
Reflex Gauge Glass 280x30x17mm DIN 7081 Klinger USA

Chemico Double Ended Grinding Paste

Chemico Valve Grinding Paste Double Ended has been popular for many years with both auto enthusiasts and repair workshops, providing a handy supply of a coarse grinding paste to cut and fine grinding paste to finish, it is widely used for:
General Engineering. Tool making. Lapping, grinding and seating valves in engines. Hone cylinders, lap out score marks and remove burrs on metal. Lap shafts into bearings. Lap nuts into bolts. Lap cylinder heads, connecting rod and crankshaft bearings

  • Remove rust and grime from outboard motor propeller shafts and boat trailers.
  • Sharpening blades for cylinder lawn mowers, hedge cutters, scissors and shears.

Content: 110g
Quantity: One Piece
Fine – 220 Grit
Coarse – 80 Grit
Made in England

In Stock

Sku:2704

200

Chemico Double Ended Grinding Paste

  • Fine – 220 Grit
  • Coarse – 80 Grit

Chemico Valve Grinding Paste Double Ended has been popular for many years with both auto enthusiasts and repair workshops, providing a handy supply of a coarse grinding paste to cut and fine grinding paste to finish. Chemico Valve Grinding paste has a lithium grease base, specifically formulated and manufactured solely for Chemico Sales & Overseas Ltd. It has inherent shear stability, that is the lubricant remains in place during the grinding operation for the most efficient grinding, together with inherent corrosion protection and good sealing properties.

Silicon carbide is one of the hardest abrasives known and the particles are especially sharp. Moreover they are brittle and tend to break up into smaller particles that still retain their sharpness and so continue to work efficiently. Use for grinding, lapping and seating valves in automotive, agricultural, garden and marine engines and for oilfield and other general engineering applications.

Always consult manufacturer’s handbook/manual before commencing any operation and follow instructions given fully. The above is supplied for information and is based on laboratory and practical experience. In view of the wide range of applications and conditions of use no liability is accepted for any loss or accident which occur from its use or application

Features:

  • Fine – 220 Grit
  • Coarse – 80 Grit
  • Silicon carbide & lithium based grease
  • Net weight 110 gm
  • This product contains Coarse and Fine grades of grinding paste in the famous double ended tin

Directions for Use of Chemico Valve Grinding Paste

Always consult manufacturer’s handbook/manual for instructions and follow these carefully.
Otherwise for seating valves:

  1. Apply a small amount of paste to valve seat
  2. Avoid contact of the grinding paste with the valve stem and guide
  3. Grind the valve in the normal manner until a uniform seat of the desired appearance is obtained
  4. If the seat is badly pitted, first use a coarser grade paste then trim with the fine grade
  5. When a satisfactory seat has been obtained, clean off well and degrease with a suitable solvent such as paraffin before valve reassembly

The coarser the grit the harsher the grind, i.e. more scoring

Valve Grinding Video

MSDS

Chemico-Double-Ended-MSDS
Your custom content goes here. You can add the content for individual product

You may also like…

Back to Top