Product

EMS FORCE 5543 50ML PIPE SEALANT
EMS FORCE 5543 50ml Pipe Sealant
NABAKEM R1 420ml Release Agent
NABAKEM R1 420ml Non-Paintable Release Agent

EMS FORCE 5543 250ml Pipe Sealant

EMS FORCE® Pipe Sealant 5543 is a medium viscosity and
medium strength anaerobic pipe sealant.

  • 100% leak-proof sealing solution for metal threaded joints
  • Very high setting speed even at cold temperatues(<0°C)
  • Fixed parts can be disassambled by hand tools
  • Approvals: NSF, WRAS, DVGW, TSE
  • Average handling time: 10 minutes (Conditions: 22°C)
  • Color: Blue
  • Gap Filling: Up to 0.2mm
  • Temperature range: -50°C to 150°C

Content: 250ml
Quantity: One Piece
Made in Turkey

In Stock

Sku:9276

Request A Quote
Compare

Features

  • Suitable for metal-metal and plastic-metal threaded connections
  • Drinking water approval for quality water applications
  • No dirt with its non-dripping formulation
  • Keeps its sealing properties against shocks & vibrations long after the application

Application

  • Close-fitting metal pipe threads where all kinds of water, oil, grease, and many chemicals pass
  • Pressure vessels
  • Air compressors
  • Hydraulic systems and tanks
  • Areas where resistance against vibration is required
  • Suitable for Type H thick metal thread joints according to TSE EN 751-1 Standard.

Usage and Instructions

Surface Preparation
  •  Ensure parts are clean, dry and free from oil and grease.​
  • Applied with a brush or directly from tube.
Application
  • Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
  • Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
  • Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
  • For disassembly, use hand tools to remove mating parts.
  • When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.

Technical Details

  • Approvals:NSF, WRAS, DVGW, TSE
  • Average handling time: 10 minutes (Conditions: 22°C)
  • Colour: Blue
  • Corrosive: Non-corrosive
  • Flash Point: >93°C (Method: ASTM D56-05)
  • Gap Filling: Up to 0.20mm
  • Shelf Life: 24 months Under recommended conditions
  • Specific Gravity: 1.030 (22°C)
  • Temperature range: -50°C to 150°C
  • Viscosity: 7000 – 8000 cPs (@20rpm) 22°C, Method: ISO 2555, Equipment: Brookfield RVT, spindle 3

Sealing Application Video

Technical Data Sheet

EMS-5543-TDS

Safety Data Sheet

EMS-5543-SDS
Your custom content goes here. You can add the content for individual product

You may also like…

0
Quote Inquiries
Back to Top