Product

EMS FORCE 5542 50ML PIPE SEALANT
EMS FORCE 5542 50ml Pipe Sealant
EMS FORCE 5543 50ML PIPE SEALANT
EMS FORCE 5543 50ml Pipe Sealant

EMS FORCE 5543 15ml Pipe Sealant

EMS FORCE® Pipe Sealant 5543 is a medium viscosity and
medium strength anaerobic pipe sealant.

  • 100% leak-proof sealing solution for metal threaded joints
  • Very high setting speed even at cold temperatues(<0°C)
  • Fixed parts can be disassambled by hand tools
  • Approvals: NSF, WRAS, DVGW, TSE
  • Average handling time: 10 minutes (Conditions: 22°C)
  • Color: Blue
  • Gap Filling: Up to 0.2mm
  • Temperature range: -50°C to 150°C

Content: 15ml
Quantity: One Piece
Made in Turkey

In Stock

Sku:9274

Request A Quote
Compare

Features

  • Suitable for metal-metal and plastic-metal threaded connections
  • Drinking water approval for quality water applications
  • No dirt with its non-dripping formulation
  • Keeps its sealing properties against shocks & vibrations long after the application

Application

  • Close-fitting metal pipe threads where all kinds of water, oil, grease, and many chemicals pass
  • Pressure vessels
  • Air compressors
  • Hydraulic systems and tanks
  • Areas where resistance against vibration is required
  • Suitable for Type H thick metal thread joints according to TSE EN 751-1 Standard.

Usage and Instructions

Surface Preparation
  •  Ensure parts are clean, dry and free from oil and grease.​
  • Applied with a brush or directly from tube.
Application
  • Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
  • Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
  • Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
  • For disassembly, use hand tools to remove mating parts.
  • When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.

Technical Details

  • Approvals:NSF, WRAS, DVGW, TSE
  • Average handling time: 10 minutes (Conditions: 22°C)
  • Colour: Blue
  • Corrosive: Non-corrosive
  • Flash Point: >93°C (Method: ASTM D56-05)
  • Gap Filling: Up to 0.20mm
  • Shelf Life: 24 months Under recommended conditions
  • Specific Gravity: 1.030 (22°C)
  • Temperature range: -50°C to 150°C
  • Viscosity: 7000 – 8000 cPs (@20rpm) 22°C, Method: ISO 2555, Equipment: Brookfield RVT, spindle 3

Sealing Application Video

Technical Data Sheet

EMS-5543-TDS

Safety Data Sheet

EMS-5543-SDS
Your custom content goes here. You can add the content for individual product

You may also like…

0
Quote Inquiries
Back to Top