CRC Dry Lube 400 ml
Dry, non greasy surface lubrication.
Features :
• Clean, dry and non-oily.
• Functional over a wide temperature range.
• Contains PTFE for extra lubricity.
• Produces a very low coefficient of friction.
• Most effective when low speeds and light loads are involved.
• High temperature resistance.
• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.
Applications for CRC Dry Lube :
• Coin mechanisms.
• Plastic drives and sliding mechanisms.
• Fine mechanics.
• Pneumatic tools.
• Precision instruments.
• Valves.
• Surface treatment.
• Release agent for moulding plastic and rubber.
• Transfer of CRC Dry Lube to moulded parts is negligible, minimizing interference with post finishing operations.
Directions :
• Shake well before use.
• Shake until the agitator ball moves freely in the can.
• To remove residues or excess product, use one of the CRC cleaners.
• Spray from a distance of approximately 20 – 30 cm.
• Allow to dry at room temperature.
• Do not use on energized equipment.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
Typical product data (without propellant)
Appearance
Liquid.
Color
Off-white.
Odor
Solvent.
Density
0.75 g/cm3 (@ 20°C).
Flash Point
< 0 °C
Density active product
2.16 g/cm3 (@ 20°C).
Operating temperature active product
max 250 °C
Drying time active product
15 min
Applications for CRC Dry Lube :
• Coin mechanisms.
• Plastic drives and sliding mechanisms.
• Fine mechanics.
• Pneumatic tools.
• Precision instruments.
• Valves.
• Surface treatment.
• Release agent for moulding plastic and rubber.
• Transfer of CRC Dry Lube to moulded parts is negligible, minimizing interference with post finishing operations.
