Product

SR_multi_mold_release_main_image
CRC SR Multi Mold Release 500 ml , General Use Silicone Based Release Agent.
Allopar-anti-tracking-red-varnish-main-image-jpg
ALLOPAR ANTI-TRACKING RED VARNISH

CRC Dry Lube PTFE Lubricant For Dry Lubrication And Use On Plastic Friction Points.

CRC DRY LUBE

PTFE lubricant for dry lubrication and use on plastic friction points.

CRC Dry Lube is a fast drying dispersion of white, waxy PTFE particles, leaving a dry lubricating film on the surface. The product exhibits outstanding anti-stick and release properties. As a lubricant, it is most effective at reduced speeds and low loads.

Content: 400 ml
Quantity: One Piece
Price: Inclusive of All Taxes
Made in Belgium

In Stock

Sku:30519

Request A Quote
Compare

CRC Dry Lube 400 ml

Dry, non greasy surface lubrication.

Features :

• Clean, dry and non-oily.
• Functional over a wide temperature range.
• Contains PTFE for extra lubricity.
• Produces a very low coefficient of friction.
• Most effective when low speeds and light loads are involved.
• High temperature resistance.
• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.

Applications for CRC Dry Lube :

• Coin mechanisms.
• Plastic drives and sliding mechanisms.
• Fine mechanics.
• Pneumatic tools.
• Precision instruments.
• Valves.
• Surface treatment.
• Release agent for moulding plastic and rubber.
• Transfer of CRC Dry Lube to moulded parts is negligible, minimizing interference with post finishing operations.

Directions :

• Shake well before use.
• Shake until the agitator ball moves freely in the can.
• To remove residues or excess product, use one of the CRC cleaners.
• Spray from a distance of approximately 20 – 30 cm.
• Allow to dry at room temperature.
• Do not use on energized equipment.
A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.

Typical product data (without propellant)
Appearance

Liquid.
Color

Off-white.
Odor

Solvent.
Density

0.75 g/cm3 (@ 20°C).
Flash Point

< 0 °C
Density active product

2.16 g/cm3 (@ 20°C).
Operating temperature active product

max 250 °C
Drying time active product

15 min

Applications for CRC Dry Lube :

• Coin mechanisms.
• Plastic drives and sliding mechanisms.
• Fine mechanics.
• Pneumatic tools.
• Precision instruments.
• Valves.
• Surface treatment.
• Release agent for moulding plastic and rubber.
• Transfer of CRC Dry Lube to moulded parts is negligible, minimizing interference with post finishing operations.

VIDEO

TDS

CRC_GREEN-DRY_LUBE-3TDS

SDS

CRC_DRY_LUBE_Aerosol-EN_BDS MSDS
Your custom content goes here. You can add the content for individual product

You may also like…

0
Quote Inquiries
Back to Top