Why CRC Non-Flammable Solvent Based Anti Spatter is Important ?
CRC Anti Spatter is traditional solvent and biodegradable oil based spatter release. Non-flammable for increased safety.
Saves cleaning time by preventing spatter adhesion on welding equipment, work pieces and jigs. Does
not contain silicone’s (use CRC Bio Weld for problem free galvanizing).
Economical in use, due to the thin film performance.
Extended nozzle stand time and increased stability of the welding arc, ensuring free gas flow.
Does not contain silicone’s.
Based on non flammable solvents.
Protects metals and alloys.
Convenient 360° (including inverted position) spray valve for aerosols.
High purity CO2 propellant, giving an active product content of 95%.
Manual, semi-automatic welding equipment as well as welding robots.
Apply a thin even film.
Spatters can be removed with a wire brush.
If post treatment involves Hot Dip Galvanizing, follow the cleaning instructions from the galvanizing
company or the galvanizing federations (info via International Zinc Association)
Protect aerosol against heat sources, welding spatters, etc…
Use only with adequate ventilation.
To remove residues or excess product, use one of the CRC cleaners.
A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is
available for all CRC products.
Typical product data (without propellant) for CRC Anti Spatter
Colorless to yellow.
1.123 g/cm3 (@ 20°C).
1.292 g/cm3 (@ 20°C).
Density active product
0.92 g/cm3 (@20°C). 0.92