Product

CRC_3-36 main image
CRC 3-36 Short-term corrosion inhibitor. Indoor protection up to 6 months
Anti_Spatter_main_image
CRC Anti Spatter Non-Flammable Solvent Based Anti Spatter

CRC Aluminium High Temperature 600°C Anti Corrosion Paint 500 ml

CRC ALU HIGH TEMP

Protective coating with aluminum look.

Resists high temperatures. Paint that resists high peak temperatures up to 600°C. Provides a hard and durable surface, which does not burn, crack, or scale down, even at high temperatures. Withstands large fluctuations in temperature. Excellent weather resistance.

Quantity: One Piece
Made in Belgium
Price: Inclusive of All Taxes
Content : 500 ml

In Stock

Sku:32421

Request A Quote
Compare

Why people’s Mostly use CRC Aluminium High Temperature 600°C Anti Corrosion Paint 500 ml

High temperature aluminium coating.

A high temperature paint based on silicone resins and active aluminium pigments.
Alu Hi Temp is designed to build a hard lasting finish that will not burn off, chip or peel at high
temperatures.

FEATURES :

• High thermal stability: resists temperatures up to 600°C.
• Excellent coverage.
• High durability.
• Quick drying at room temperature.
• Very good resistance to temperature fluctuations.
• Good weather stability. Although some loss of gloss can be noticed after extended exposure.
• Totally lead and chromate free.
• No chlorinated and no aromatic solvents.
• Aerosols use di-methyl ether (DME) propellant for controlled application and film properties.

APPLICATIONS :

• Stove pipes
• Stoves
• Heaters
• Kilns
• Incinerators
• Chimneys
• Exhaust manifolds
• Headers
• Engines
• Ovens
• Steam pipes

DIRECTIONS for CRC Aluminium High Temperature:

• Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix
bulk product well to obtain a homogeneous dispersion. Repeat frequently while using.
• Apply to a clean, de-greased, dry surface for best results. Remove rust and scale with a
wire brush.
• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat.
Additional coats can be applied after 15-30 minutes.
• Complete curing occurs during use, typically after 1 h @ 200°C or 45 min. @ 250°C.
• When spraying is finished, clean aerosol valve by turning can upside down and pressing
button until only propellant escapes. If clogging occurs, remove button and clean orifice
with fine wire.
• Do not use on energized equipment. Use in well ventilated area.
• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC
products.

VIDEO

TDS

CRC-Alu_HiTemp_Aero TDS

SDS

CRC-Alu_HiTemp_Aero MSDS
Your custom content goes here. You can add the content for individual product

You may also like…

0
Quote Inquiries
Back to Top