Why people’s Mostly use CRC Aluminium High Temperature 600°C Anti Corrosion Paint 500 ml
High temperature aluminium coating.
A high temperature paint based on silicone resins and active aluminium pigments.
Alu Hi Temp is designed to build a hard lasting finish that will not burn off, chip or peel at high
temperatures.
FEATURES :
• High thermal stability: resists temperatures up to 600°C.
• Excellent coverage.
• High durability.
• Quick drying at room temperature.
• Very good resistance to temperature fluctuations.
• Good weather stability. Although some loss of gloss can be noticed after extended exposure.
• Totally lead and chromate free.
• No chlorinated and no aromatic solvents.
• Aerosols use di-methyl ether (DME) propellant for controlled application and film properties.
APPLICATIONS :
• Stove pipes
• Stoves
• Heaters
• Kilns
• Incinerators
• Chimneys
• Exhaust manifolds
• Headers
• Engines
• Ovens
• Steam pipes
DIRECTIONS for CRC Aluminium High Temperature:
• Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix
bulk product well to obtain a homogeneous dispersion. Repeat frequently while using.
• Apply to a clean, de-greased, dry surface for best results. Remove rust and scale with a
wire brush.
• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat.
Additional coats can be applied after 15-30 minutes.
• Complete curing occurs during use, typically after 1 h @ 200°C or 45 min. @ 250°C.
• When spraying is finished, clean aerosol valve by turning can upside down and pressing
button until only propellant escapes. If clogging occurs, remove button and clean orifice
with fine wire.
• Do not use on energized equipment. Use in well ventilated area.
• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC
products.
