Use for Fixing, Sealing Insulating, Filling and Mounting
Bison PU Construction Foam can be used for a number of different applications. Not just for do-it-yourself jobs, but also for those moments when you’re feeling creative. Therefore we’ve listed some tips that are useful to know!
WORKING WITH Bison PU Construction Foam
Tip 1
A substrate that is slightly moist stimulates a faster and complete full-curing of the foam.
Tip 2
Protect outdoor applications from the effects of the weather by painting them.
Tip 3
Large hollow areas are best-filled layer by layer. Before applying a new layer, wait until the previous one is completely intumescent.
Tip 4
You must always store aerosol spray cans of Construction Foam upside-down. Sometimes there is no space for this.
Professional quick-setting polyurethane foam, high expansion capacity, can be painted, temperature resistant from -40c to +90c. For inside and outside use.
Construction Foam Straw :
Professional quick-setting polyurethane foam, high expansion capacity, can be painted, temperature resistant from -40°C to +90°C. For inside and outside use.
Uses :
Fast and easy sealing, insulting bonding, and filling of large seams, joints, and cracks against heat loss, cold, draught, noise, and moisture. Adheres to all building materials except polyethylene foil, silicones, and PTFE.
Applications :
Wear gloves safety glasses and overalls. Surfaces: clean and grease-free. Moisten dry surfaces (for faster setting.) Shake aerosol vigorously before use (about 20 times). Screw aerosol on the and operate. Fill holes and cavities up to 50%.
Important :
Application temperature between +5°C and +35°C. Remove any dabs on clothes or skin immediately with acetone. Remove any hardened stains mechanically. The aerosol is stored upright and at room temperature.
