Why CRC SP 400 500 ml is Important ?
Features :
• Long term corrosion protection.
• Displaces and seals out water and moisture.
• Safe on all metal surfaces, does not stain.
• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.
• Can be removed or diluted for film thickness variation, with petroleum solvents.
• Corrosion resistance fulfills the salt spray criteria of MIL-C-16173°E grade 4.
Applications :
• Long term outdoor corrosion protection.
• Corrosion protection during overseas transport.
• Seasonal corrosion protection.
• Corrosion protection of all ferrous materials.
• To be used for brine or chloride resistance in refrigeration plants.
Directions :
• Shake well before use.
• Stir or mix bulk products well before use.
• Repeat frequently during the application.
• Use only with adequate ventilation.
• Do not use on energized equipment.
• Apply to a clean, dry surface.
• Clean the aerosol valve by turning the can upside down and spraying until only propellant escapes.
• Film thickness may be adjusted by thinning with petroleum solvents, but corrosion resistance varies with film
thickness.
For application in very humid conditions, CRC 3-36 should be applied first for complete moisture displacement.
Allow 2 to 4 hours for solvent evaporation before SP 400 II is applied.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
Typical product data (without propellant) for CRC SP 400
Appearance
Wax.
Wax.
Odor
Characteristic odor.
Characteristic odor.
Density
0.865 g/cm3 (@ 20°C).
0.874 g/cm3 (@ 20°C).
Flash Point
< 0 °C
41 °C (Closed Cup)
Auto Ignition temperature
> 200 °C
> 200 °C
Operating temperature active product max.
80 °C max.
80 °C
Drying time active product
60 – 120 min
60 – 120 min
Typical coat weight
10 – 50 µm
10 – 50 µm
salt spray resistance active product
at 50µ: >500 h
at 50µ: >500 h
Packaging
Aerosol
12×250 ML
Ref. : 32661
12×500 ML
Ref. : 32350
Bulk
2×5 L
Ref. : 20324
