CRC ECO Leak Finder Water Based Gas Leak Detector
Detects and locates quickly and reliably gas leaks in pressurized systems by forming highly visible bubbles. Can be used for natural gas, propane, butane, acetylene, LPG, nitrogen, carbon dioxide, compressed air, refrigerants, oxygen and other types of gases. Compatible with metals and plastics. Biodegradable according to OECD 301B: 31%.
Features of CRC ECO Leak Finder :
• Can be use for almost all types of gases.
• DVGW (Deutche Vereinigung des Gas- und Wasserfaches) approved according to DIN EN 14291:NG5170AS0069.
• Meets the requirements of MIL-L-25567 for oxygen compatibility. Testing of oxygen systems must be done
carefully and product residues should not be allowed to build up.
• Stable foam formulation.
• Non corrosive.
• Safe on all metal surfaces, does not stain.
• Convenient 360° (including inverted position) spray valve for aerosols.
Application :
• For the detection of almost all types of gas leaks.
Directions :
• Apply a thin even film.
• Bubbles will appear at the precise location of the leak.
• When used on plastic, copper or oxygen systems, product residues should be washed away with water.
• Do not use on energized equipment.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
• Apply a thin even film.
• Bubbles will appear at the precise location of the leak.
• When used on plastic, copper or oxygen systems, product residues should be washed away with water.
• Do not use on energized equipment.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
Typical product data :
Aerosol
Bulk
Appearance
Not available.
Liquid.
Color
Colorless.
Colorless.
Odor
Neutral.
Odorless.
Density
0.999 g/cm3 (@ 20°C).
1.01 g/cm3 (@ 20°C).
Flash Point
None
None
pH
7.76
7.0
Storage comment
do not store < 0°
DO NOT STORE < 0°C
Surface tension active product
Not available.
27 mN/m
NSF registration
Not available.
142802 Cat P1