Features
- Can be used on all kinds of rough surfaces.
- Used for strengthening mechanical connections.
- Fits impellers and shafts together. Fills gaps in worn out joints.
Usage and Instructions
Application
1)Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
2)- Apply the adhesive to the surfaces.
3)Use an absorbent tissue paper to wipe off excess jointing compound.
4)Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
5)For disassembly, use hand tools to remove mating parts.
When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
