S00200 Dry Moly Lube
S00200 is a non-methylene chloride formula with an extremely low coefficient of friction at.23 per ASTM D4518.
is a high solid, dry molybdenum disulfide coating. Dark grey in color, it bonds to all clean surfaces that are not adversely affected by alcohol or aromatic hydrocarbons such as toluene or xylene. Air dries in 5-10 minutes and cures in 2 hours at room temperature. For food plants and other industrial use only. Avoid contamination of food during the use and storage of this product.
Typical Uses :
- Parking meters
- Bearings
- Automotive and industrial gaskets
- Tumbler Locks
- Vending machines
- Chutes and bins
- Machine and sliding surfaces
- Intricate mechanisms
- Machine bearings
- Chain Drives
Danger!
Extremely flammable-vapors way cause flash fires! Contents under pressure. Vapor harmful Irritates, eyes, Skin and Respiratory Tract. See contents statement elsewhere on the label.
Keep away from heat, sparks, and open flames. Vapors will accumulate readily and may ignite explosively. Keep area ventilated during use and until all vapors are gone.
Do Not Smoke:
Extinguish all flames pilot lights and heaters -Turn off solves, electric tools and appliances, and any other sources of ignition Avoid prolonged exposure to sunlight or heat from radiators, stoves, hot water, and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120°F. upright in a cool, dry place. Do not discard empty can in the trash compactor. Use with adequate ventilation. Avoid continuous breathing of vapor and spray mist. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering headaches or dizziness, increase fresh air or water respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hand after using.
First Aid:
In case of eye contact flush thoroughly with a large amount of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty provide fresh and call physicians.
Delayed Effects from long-term overexposure: Contain solvent which can cause permanent brain and nervous system damage. Intentional Misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Warnings: this product contains chemicals known to be the state of California to cause cancer and birth defects or other reproductive harm.
High-viscosity oil clings to moving parts
Foaming action penetrates close tolerances of chain drive bushings and pins to provide long-lasting lubrication
Reduces friction wear on moving parts and in metal-to-metal applications
Moly additive improves the capacity to handle greater pressure requirements of startup stress
SPRAY ANYWAY™ valve allows the material to be applied to the surface when the can is being held in either an upright or inverted position
Uses Chain drives and pins, forklift trucks, link and roller assemblies, machinery, work-stand rollers, assembly lines, packaging equipment, motorcycle and bicycle, chains, sprockets, clippers, cutter bars, chain saws, bushings, hoist chains, conveyors and tractors.
