Product

Crick-110-120-130-with-stamp
CRC Crack Detector Set , Content : 500 ml, Made in Belgium
CRC Crick 110 500 ml Solvent Cleaner Made in Belgium

CRC Crick 120 500ml Water Washable Red Penetrant Made in Belgium

CRC CRICK 120

Penetrating colorant to mark the cracks and failures.

Red colored, water washable penetrant for non-destructive testing of metal surfaces. The penetrant can flow into tiny cracks within a time frame of 10 to 20 minutes. The excess of penetrant has to be washed away before using the developer.

Content: 500ml
Quantity: One Piece
Made in Belgium

In Stock

Sku:30205

Request A Quote
Compare

Do you Know Why peoples mostly use CRC Crick 120 500 ml Water Washable Red Penetrant ?

Yes , because it’s a red-colored liquid penetrant for the non-destructive testing of surfaces and structures. Many cracks in engineering materials can be deep in spite of having a very small opening width on the surface and can cause very serious defects. By normal visual inspection such cracks may be very difficult to detect, but penetrant flaw detection is an extension of the visual inspection method. The control is carried out using 3 products: CRC Crick 110 (cleaner), CRC Crick 120 (penetrant) and CRC Crick 130 (developer). CRC Crick 120 is a water washable liquid penetrant visible with natural white light. Based on special hydrocarbons, with high boiling point, surfactants, corrosion inhibitors and dyes.

Features :

• The check can be carried out with ready-to-use aerosols.
• It produces results in a speedy and easy way.
• An economical technology with no need for expensive and advanced equipment.
• A sensitive and reliable test method.
• Widely applicable, regardless the nature of the materials and shape of the objects.
• The aerosol uses a hydrocarbon propellant for controlled application.
• Halogen content tested according to ASME Section V, art 6.

Applications :

Non-destructive inspection of materials, parts, assemblies, equipment, surfaces or
structures:
• Cracks, lack of fusion and open cavities in welded parts.
• Cracks and cavities caused by metal fatigue and cutting operations.
• Check of porosity or leaks in pipes, tanks, boilers, heat exchangers.
• Discontinuities, laps, folds and cracks in castings, forgings and ceramics.

Directions :

Do not use at ambient temperatures below 10°C.
• In liquid penetrant inspections, the test object or material is coated with a visible dye
solution. The excess dye is removed from the surface and a developer is then applied. The
developer acts like a blotter and draws penetrant out of the imperfections of the surface.
With visible dyes, the vivid color contrast between the penetrant and the developer makes
the ‘bleed-out’ easy to see.
• Cleaning of the surface
The surface to be checked must be clean, de-greased and dry. All soil, like rust, oil, grease,
paint etc, which can mask the imperfections, must be removed. Finish the cleaning by
spraying CRC Crick 110 generously. If possible wipe with an absorbent cloth and allow
drying thoroughly.

VIDEO

TDS

Crick_120_TDS

SDS

Crick_120_MSDS_500ml
Your custom content goes here. You can add the content for individual product

You may also like…

0
Quote Inquiries
Back to Top